Python Style Guide
This document describes expected practices when writing Python code. There are occasions when you can break these rules, but be prepared to justify doing so when your code gets reviewed.
Python Style Guide
- Existing Conventions
- Related Documents on This Wiki
- Whitespace and Wrapping
- Truth conditionals
- If statements
- Chaining method calls
- Use of lambda, and operator.attrgetter
- Use of hasattr
- Database related
- Unpacking assignment
- Wrapping long arguments in function definitions
There are well-established conventions in the Python community, and in general we should follow these. General Python conventions, and required reading:
PEP 8: Style Guide for Python Code
PEP 257: Docstring Conventions
The Zen of Python: python -c "import this"
Note that our standards differ slightly from PEP-8 in some cases.
Coding standards other projects use:
Related Documents on This Wiki
Whitespace and Wrapping
- Code should fit within 78 columns, so as to fit nicely in an 80 column terminal, even when quoted in an email.
- Indents should be 4 spaces.
No tabs. This is not negotiable.
For statements that span multiple lines, use () rather than \.
There are lots of cases where you might have a list, tuple or dictionary literal that spans multiple lines. In these cases, you should always format these literals as such:
Things to note:
- The opening brace (or parenthesis or bracket) sits at the right end of the first line. Nothing follows this open brace.
- Every subsequent item in the sequence is on a line by itself, and every line ends in a comma. This includes the last item in the sequence.
- The closing brace lives on a line by itself and is indented to be under the first non-whitespace character of the last item line.
This style holds for __all__ declarations, such that this is correct:
Note however one exception: multiline imports. In this case, we scrunch all the imports into as few lines as possible, and of course we sort the names alphabetically. See Imports for more details about our import style.
To make wrapping and tabs fit the above standard, you can add the following to your .vimrc:
autocmd BufNewFile,BufRead *.py set tw=78 ts=4 sts=4 sw=4 et
To make trailing whitespace visible:
set list set listchars=tab:>.,trail:-
This will also make it obvious if you accidentally introduce a tab.
To make long lines show up:
match Error /\%>79v.\+/
For an even more in-depth Vim configuration, have a look at UltimateVimPythonSetup for a complete vim file you can copy to your local setup.
There are actually two Emacs Python modes. Emacs comes with python.el which (IMO) has some quirks and does not seem to be as popular among hardcore Python programmers. python-mode.el comes with XEmacs and is supported by a group of hardcore Python programmers. Even though it's an add-on, it works with Emacs just fine.
Classes should be in CamelCase
Methods should be initialCamelCase
Functions should use_underscores
Non-method attributes and properties should use_underscores
Local variables should use_underscores
Modules should be in lowercase
Constants should be in ALL_CAPS
Interface class names should always begin with I
- Single character names should be avoided for both variables and methods. Even list comprehensions and generator expressions should not use them.
However, these rules may not apply when modifying non-Launchpad code -- e.g. Zope. In those cases, consistency with existing code should be a priority. When working on older Launchpad code that doesn't meet this standard, converting it is preferable but not required.
As PEP-8 states, consistency is the top priority.
Take care not to use names that shadow builtins. This includes names such as str, list or dict. This can cause subtle bugs; for example:
It is okay to shadow builtins that we don't use, such as filter and reduce.
Private Name Mangling
In general, don't mangle attribute names using two leading underscores, e.g. __very_specific_attribute:
Just use a single underscore to create a pseudo-private attribute and name it appropriately.
BarryWarsaw says: double-underscore private names are really only there to assist in classes designed for inheritance. If class A wants to make sure some of its private attributes won't collide with subclass B's attributes, you can use double-underscores. This is pretty rare, and since we control all the code, is almost never appropriate for Launchpad.
Private names are private
You should never call a non-public attribute or method from another class. In other words, if class A has a method _foo(), don't call it from anywhere outside class A.
Since we control all the Launchpad code, it's almost always better to just rename A._foo() to A.foo(), making it public, and then it's fine to call it from outside class A.
If you need to keep the old name for backward compatibility (because you don't want to change all call sites right now), create an alias and make sure you indicate that the old name is deprecated.
If you haven't already, read PEP 257
- In general, everything that can have a docstring should: modules, classes, methods, functions.
Docstrings should always be enclosed in triple double quotes: """Like this."""
When a class or a method implements an interface, the docstring should say """See `IFoo`."""
You should use fields to describe arguments, return values, and exceptions raised, as documented in epydoc. Avoid using synonym fields such as "returns" and "raises".
Using `name` outputs a link to the documentation of the named object, if pydoctor can figure out what it is. For an example of pydoctor's output, see http://starship.python.net/crew/mwh/hacks/example.html.
Here are some examples:
1 def example2(a, b): 2 """Perform some calculation. 3 4 It is a **very** complicated calculation. 5 6 :param a: The number of gadget you think this 7 function should frobnozzle. 8 :type a: ``int`` 9 :param b: The name of the thing. 10 :type b: ``str`` 11 :return: The answer! 12 :rtype: ``str``. 13 :raise ZeroDivisionError: when ``a`` is 0. 14 """
There is some controversy about whether interface methods should get a docstring or not. OT1H, we want everything that can have a docstring to have a docstring. OTOH, this messes up pydoctor which can extract the method's docstring from the interface if the implementation doesn't have a docstring. We have no resolution on this yet, so for now, include the docstrings on such methods.
Each module should look like this:
The file standard_template.py has most of this already, so save yourself time by copying that when starting a new module. The "..." should be filled in with a list of public names in the module. See [#multiline the section on multiline braces] for more details.
Note that although PEP-8 says to "put any relevant __all__ specification after the imports", Launchpad code should have the __all__ before the imports. This makes it easy to see what a module contains and exports, and avoids the problem that differing amounts of imports among files means that the __all__ list is in a different place each time. Given that we have the Import Fascist utility (see Imports), we use __all__ more often than in general Python code.
Importing a module should not have side effects. This means that any code other than a function/class/constant declaration should be guarded by an if __name__ == '__main__': line.
There are restrictions on which imports can happen in Launchpad. Namely:
- Database code cannot be imported directly
import * cannot be used if the module being imported from does not have an __all__
Database code may not import zope.exceptions.NotFoundError -- it must instead use canonical.launchpad.interfaces.NotFoundError
These restrictions are enforced by the Import Fascist, which will cause your tests not to pass if you don't abide by the rules.
Imports should be fully qualified. Good:
I.e. if foo.bar imports foo.baz, it should say import foo.baz, not import baz.
Imports should not be circular. Bad:
This causes weird bugs. Find a different way to structure your code.
Sometimes import lines must span multiple lines, either because the package path is very long or because there are multiple names inside the module that you want to import.
Never use backslashes in import statements! Use parenthesized imports:
Our style guide for multiline import statements differs from our general guideline for multiline braces, as a compromise to keep our import sections to a reasonable size. Our imports should be scrunched together, and of course sorted alphabetically, like so:
Also, 'make lint' is a very good tool for helping you maintain your imports.
We now discourage importing names from packages, where the package's __init__.py has sub-module import-* statements. We used to do this quite a bit for canonical.launchpad.interfaces and many other packages. This style is discouraged now because
import-*'s obscure the actual location of names, making finding the
- objects much more difficult
- their use tends to encourage hugantically ginormous multiline import
- statements, increasing the likelihood of merge conflicts
you also have to maintain the __init__.py files
- this style can lead to circular import problems
Instead, we now recommend that you do not add import-*'s in a package's __init__.py, and instead, use the more fully qualified import statements in your code. E.g. instead of
1 from canonical.launchpad.interfaces import ( 2 CannotChangeSubscription, CannotSubscribe, CannotUnsubscribe, 3 EmailAddressStatus, IEmailAddressSet, IHeldMessageDetails, 4 ILaunchpadCelebrities, IMailingList, IMailingListSet, 5 IMailingListSubscription, IMessageApproval, IMessageApprovalSet, 6 IMessageSet, MailingListStatus, PostedMessageStatus)
1 from canonical.launchpad.interfaces.emailaddress import ( 2 EmailAddressStatus, IEmailAddressSet) 3 from canonical.launchpad.interfaces.launchpad import ILaunchpadCelebrities 4 from canonical.launchpad.interfaces.mailinglist import ( 5 CannotChangeSubscription, CannotSubscribe, CannotUnsubscribe, 6 IHeldMessageDetails, IMailingList, IMailingListSet, 7 IMailingListSubscription, IMessageApproval, IMessageApprovalSet, 8 MailingListStatus) 9 from canonical.launchpad.interfaces.message import IMessageSet
With the increased use of native Storm APIs, you may encounter more circular import situations. For example, a MailingList method may need a reference to the EmailAddress class for a query, and vice versa. The classic way to solve this is to put one of the imports inside a method instead of at module global scope (a "nested import").
Short of adopting something like Zope's lazy imports (which has issues of its own), you can't avoid this, so here are some tips to make it less painful.
- Do the nested import in the least common case. For example, if 5 methods
in database/mailinglist.py need access to EmailAddress but only one method in database/emailaddress.py needs access to MailingList, put the import inside the emailaddres.py method, so you have fewer overall nested imports.
- Clearly comment that the nested import is for avoiding a circular import, using the example below.
- Put the nested import at the top of the method.
Trivial attribute getter/setter functions are not necessary. Python takes a "We're all consenting adults" view on encapsulation, so if you want to access an attribute on an instance, just do it.
Be careful when accessing attributes of attributes. E.g.:
1 x = foo.bar.baz * 2
If foo.bar is None, Bad Things will happen, so always check if you're not sure. This is sometimes referred to as the "two dots rule".
If you need to dynamically access an attribute, use getattr rather than eval. It is clearer and safer. For example:
1 callback = getattr(self, "handler_" + state)
When you need to add a property, ensure that __metaclass__ = type is used as mentioned above. For a read-only property, use the following pattern:
You should rarely need to add a property that has a getter and a setter, but on those occasions, this is how to do it. The getter is the same as for the simple case. The setter is called _setfoo. The name _setfoo starts with an underscore to show that it is not meant to be used except via the property.
Note the order: getter, setter, make them into a property.
Launchpad style tests for boolean True only. False, None, and 0 are not the same, and tests that rely on them being the same are ambiguous. Tests of objects that may be None or 0 must be written as truth tests because either value will be interpreted as False by the test.
Let's say you have a sequence (e.g. a list or tuple) and you want test whether it's empty or not. Standard Python convention is just to use Python's rules that empty sequences are false:
However, Launchpad hackers consider it to be more explicit to test against the sequence's length:
If the value could be None though, please check explicitly against that using an identity check. In other words, don't do this:
1 if not foo:
and definitely don't do this:
1 if foo == None:
do this instead:
1 if foo is None:
Note though that is and is not comparisions should only be used for comparing singletons, which include built-ins like None but also singleton objects you create in your program:
You wouldn't use == in that case, but similarly, if you're not comparing against singletons, you should not use is, but ==:
1 if thing == 'foo':
You might think that because of string interning, it would be safe to use is here, but remember that interning is an implementation detail and you should not count on any particular string being interned. Always use == for comparison against strings and numbers. Note too that because of the way we use SQLObject, there may be some cases where you have to use == in places you'd normally think to use `is'.
The most commonly used patterns like
are perfectly fine.
However, if you do have some elif statements, we consider it a good practice to always include an else statement, even if it contains only a comment and a pass statement, or an assert statement with an appropriate failure message.
Similarly you may have empty elif blocks, like
This may be considered an example of the "Explicit is better than implicit." principle.
Chaining method calls
Since in some cases (e.g. class methods and other objects that rely on descriptor get() behaviour) it's not possible to use the old style of chaining method calls (SuperClass.method(self, ...)), we should always use the super() builtin when we want that.
The exception to this rule is when we have class hierarchies outside of our control that are known not to use super() and that we want to use for diamond-shaped inheritance.
Use of lambda, and operator.attrgetter
Avoid using lambda expressions. It is usually better to define a small function and use that instead; this ensures that your function has a meaningful name, allows you to write a docstring, and allows the function to be tested more easily.
A common reason to use lambda is when you want to sort a list of objects according to one of the object's attributes. Such code will often look like this:
In this case, you can use operator.attrgetter instead.
Note that you can use attrgetter only when you want to sort on an attribute. You cannot use it like this when you want to sort on the result of calling a method, or when you want to sort on more than a single attribute.
Use of hasattr
Use of the built-in hasattr function should be avoided since it swallows exceptions. Instead use:
if getattr(obj, 'attrname', None) is not None:
However, if None is a valid value for the attribute, you have to do this instead:
missing = object() if getattr(obj, 'attrname', missing) is not missing:
We use two database ORM (object-relational mapper) APIs in Launchpad, the older and deprecated SQLObject API and the new and improved Storm API. All new code should use the Storm API, and you are encourages to convert existing code to Storm as part of your tech-debt payments.
The SQLObject and Storm ResultSet interfaces are not compatible, so e.g. if you need to UNION between these two, you will run into trouble. We are looking into ways to address this.
Using the native Storm API can be verbose and inconvenient for some folks. There is a (somewhat) experimental Sugar base class in lib/canonical/launchpad/database/stormsugar.py which provides many convenient APIs to make your use of Storm easier.
When you need to add ID attributes to your database class, use field_id as the attribute name instead of fieldID.
SQL doesn't care about whitespace, so use triple quotes for large SQL queries or fragments, e.g.:
This also easy to cut-and-paste into psql for interactive testing, unlike if you use several lines of single quoted strings.
1 val_1, val_2 = multival_func()
And for 1-tuples
Wrapping long arguments in function definitions
If you need to write a function or method with a long list of arguments, you should format it thus: