Diff for "PythonStyleGuide"

Not logged in - Log In / Register

Differences between revisions 15 and 36 (spanning 21 versions)
Revision 15 as of 2010-07-08 08:39:52
Size: 27701
Editor: jml
Comment:
Revision 36 as of 2021-11-25 16:16:21
Size: 74
Editor: cjwatson
Comment: redirect to readthedocs
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= Python Style Guide =

This document describes expected practices when writing Python code. There are occasions when you can break these rules, but be prepared to justify doing so when your code gets reviewed.

<<TableOfContents>>

== Existing Conventions ==

There are well-established conventions in the Python community, and in general we should follow these. General Python conventions, and required reading:

 * [[http://www.python.org/peps/pep-0008.html|PEP 8]]: Style Guide for Python Code
 * [[http://www.python.org/peps/pep-0257.html|PEP 257]]: Docstring Conventions
 * The Zen of Python: {{{python -c "import this"}}}

Note that our standards differ slightly from PEP-8 in some cases.

Coding standards other projects use:

 * [[http://twistedmatrix.com/projects/core/documentation/howto/policy/coding-standard.html|Twisted Coding Standard]]
 * [[http://dev.zope.org/Wikis/DevSite/Projects/ComponentArchitecture/CodingStyle|CodingStyle for Zope 3]]

== Related Documents on This Wiki ==

 * ExceptionGuidelines
 * AssertionsInLaunchpad
 * [[LaunchpadHackingFAQ]]
 * TestsStyleGuide

== Whitespace and Wrapping ==

 * Code should fit within 78 columns, so as to fit nicely in an 80 column terminal, even when quoted in an email.
 * Indents should be 4 spaces.
 * '''No tabs'''. This is not negotiable.
 * For statements that span multiple lines, use {{{()}}} rather than {{{\}}}.

<<Anchor(multiline)>>
=== Multiline braces ===

There are lots of cases where you might have a list, tuple or dictionary
literal that spans multiple lines. In these cases, you should always format
these literals as such:

{{{#!python
    mydict = {
        'first': 1,
        'second': 2,
        'third': 3,
        }

    mylist = [
        'this is the first line',
        'this is the second line',
        'this is the third line',
        ]
}}}

Things to note:

 * The opening brace (or parenthesis or bracket) sits at the right end of the
 first line. Nothing follows this open brace.
 * Every subsequent item in the sequence is on a line by itself, and every line ends in a comma. This includes the last item in the sequence.
 * The closing brace lives on a line by itself and is indented to be under the
 first non-whitespace character of the last item line.

This style holds for `__all__` declarations, such that this is correct:

{{{#!python
__all__ = [
    'HeldMessageDetails',
    'MailingList',
    'MailingListSet',
    'MailingListSubscription',
    'MessageApproval',
    'MessageApprovalSet',
    ]
}}}

Note however one exception: multiline imports. In this case, we scrunch all
the imports into as few lines as possible, and of course we sort the names
alphabetically. See [[#imports|Imports]] for more details about our import
style.

=== Multiline function definitions ===

When your code ''defines'' a function or method with lots of parameters, it
could very well exceed the 79 character maximum. In that case, you have two
options for wrapping the parameter list. The first one is preferred.

{{{#!python
        def do_something(the_first_argument, the_second_argument,
                         the_third_argument, the_fourth_argument,
                         the fifth_argument):
}}}

If indention or length of the function name make the first form impractical, use
this second form.

{{{#!python
        def do_something_that_needs_a_lot_explaining(
            the_first_argument, the_second_argument, the_third_argument,
            the_fourth_argument, the fifth_argument):
}}}

It might be a good idea to leave a blank line after the parameter list when
using this style. Remember, it's all about readability.


=== Multiline function calls ===

When your code ''calls'' a function with lots of arguments, it could very well
exceed the 79 character maximum. In that case, you should wrap your function
call to fit, like so:

{{{#!python
        my_thing = some_object.do_something_to(
            the_first_argument, the_second_argument, the_third_argument,
            the_fourth_argument, the fifth_argument)
}}}

'''Do not''' indent your code like this:

{{{#!python
        my_thing = some_object.do_something_to(the_first_argument,
                                               the_second_argument,
                                               the_third_argument,
                                               the_fourth_argument,
                                               the fifth_argument)
}}}

or like this:

{{{#!python
        my_thing = some_object.do_something_to(the_first_argument,
            the_second_argument, the_third_argument, the_fourth_argument,
            the fifth_argument)
}}}

=== Vim Configuration ===

To make wrapping and tabs fit the above standard, you can add the following to your {{{.vimrc}}}:

{{{
autocmd BufNewFile,BufRead *.py set tw=78 ts=4 sts=4 sw=4 et
}}}

To make trailing whitespace visible:

{{{
set list
set listchars=tab:>.,trail:-
}}}

This will also make it obvious if you accidentally introduce a tab.

To make long lines show up:

{{{
match Error /\%>79v.\+/
}}}

For an even more in-depth Vim configuration, have a look at UltimateVimPythonSetup for a complete vim file you can copy to your local setup.

=== Emacs Configuration ===

There are actually two Emacs Python modes. Emacs comes with `python.el` which
(IMO) has some quirks and does not seem to be as popular among hardcore Python
programmers. [[http://launchpad.net/python-mode|python-mode.el]] comes with
XEmacs and is supported by a group of hardcore Python programmers. Even
though it's an add-on, it works with Emacs just fine.

== Naming ==

 * Classes should be in {{{CamelCase}}}
 * Methods should be {{{initialCamelCase}}}
 * Functions should {{{use_underscores}}}
 * Non-method attributes and properties should {{{use_underscores}}}
 * Local variables should {{{use_underscores}}}
 * Modules should be in {{{lowercase}}}
 * Constants should be in {{{ALL_CAPS}}}
 * Interface class names should always begin with {{{I}}}
 * Single character names should be avoided for both variables and methods. Even list
 comprehensions and generator expressions should not use them.

However, these rules may not apply when modifying non-Launchpad code -- e.g. Zope. In those cases, consistency with existing code should be a priority. When working on older Launchpad code that doesn't meet this standard, converting it is preferable but not required.

As PEP-8 states, consistency is the top priority.

=== Shadowing Builtins ===

Take care not to use names that shadow builtins. This includes names such as {{{str}}}, {{{list}}} or {{{dict}}}. This can cause subtle bugs; for example:

{{{#!python
def func(str):
    ...
    # Convert number to a string
    s = str(number) # BOOM!
}}}

It is okay to shadow builtins that we don't use, such as `filter` and `reduce`.

=== Private Name Mangling ===

In general, don't mangle attribute names using two leading underscores, e.g. `__very_specific_attribute`:

  http://www.python.org/doc/2.4.4/ref/atom-identifiers.html

Just use a single underscore to create a pseudo-private attribute and name it appropriately.

''BarryWarsaw says: double-underscore private names are really only there to
assist in classes designed for inheritance. If class A wants to make sure
some of its private attributes won't collide with subclass B's attributes, you
can use double-underscores. This is pretty rare, and since we control all the
code, is almost never appropriate for Launchpad.''

=== Private names are private ===

You should never call a non-public attribute or method from another class. In
other words, if class A has a method `_foo()`, don't call it from anywhere
outside class A.

Since we control all the Launchpad code, it's almost always better to just
rename `A._foo()` to `A.foo()`, making it public, and then it's fine to call
it from outside class A.

If you need to keep the old name for backward compatibility (because you don't want to change all call sites right now),
create an alias and make sure you indicate that the old name is deprecated.

== Docstrings ==

 * If you haven't already, read [[http://www.python.org/peps/pep-0257.html|PEP 257]]
 * In general, everything that can have a docstring should: modules, classes, methods, functions.
 * Docstrings should always be enclosed in triple double quotes: {{{"""Like this."""}}}
 * When a class or a method implements an interface, the docstring should say {{{"""See `IFoo`."""}}}

Docstrings should be valid [[http://docutils.sourceforge.net/rst.html|reST]] (with all the painful indentation rules that implies) so that tools such as [[http://codespeak.net/~mwh/pydoctor/|pydoctor]] can be used to automatically generate API documentation.

You should use ''fields'' to describe arguments, return values, and exceptions raised, as documented in [[http://epydoc.sourceforge.net/fields.html|epydoc]]. Avoid using synonym fields such as "returns" and "raises".

Using {{{`name`}}} outputs a link to the documentation of the named object, if pydoctor can figure out what it is. For an example of pydoctor's output, see http://starship.python.net/crew/mwh/hacks/example.html.

Here are some examples:

{{{#!python
def example1(a, b):
    """Perform some calculation.

    It is a **very** complicated calculation.
    """
}}}

{{{#!python
def example2(a, b):
    """Perform some calculation.

    It is a **very** complicated calculation.

    :param a: The number of gadget you think this
              function should frobnozzle.
    :type a: ``int``
    :param b: The name of the thing.
    :type b: ``str``
    :return: The answer!
    :rtype: ``str``.
    :raise ZeroDivisionError: when ``a`` is 0.
    """
}}}

{{{#!python
def example3():
    """Call `example2` with sensible arguments."""
}}}

''There is some controversy about whether interface methods should get a docstring or not. OT1H, we want everything that '''can''' have a docstring '''to''' have a docstring. OTOH, this messes up `pydoctor` which can extract the method's docstring from the interface if the implementation doesn't have a docstring. We have no resolution on this yet, so for now, include the docstrings on such methods.''

== Modules ==

Each module should look like this:

{{{#!python
# Copyright 2004-2007 Canonical Ltd. All rights reserved.

"""Module docstring goes here."""

__metaclass__ = type
__all__ = [
    ...
    ]
}}}

The file {{{standard_template.py}}} has most of this already, so save yourself
time by copying that when starting a new module. The "..." should be filled in
with a list of public names in the module. See [#multiline the section on
multiline braces] for more details.

Note that although PEP-8 says to "put any relevant {{{__all__}}} specification
after the imports", Launchpad code should have the {{{__all__}}} before the
imports. This makes it easy to see what a module contains and exports, and
avoids the problem that differing amounts of imports among files means that
the `__all__` list is in a different place each time. Given that we have the
Import Fascist utility (see [[#imports|Imports]]), we use {{{__all__}}} more
often than in general Python code.

Importing a module should not have side effects. This means that any code other than a function/class/constant declaration should be guarded by an {{{if __name__ == '__main__':}}} line.

<<Anchor(imports)>>
== Imports ==

=== Restrictions ===

There are restrictions on which imports can happen in Launchpad. Namely:

 * Database code cannot be imported directly
 * {{{import *}}} cannot be used if the module being imported from does not have an {{{__all__}}}
 * Database code may not import {{{zope.exceptions.NotFoundError}}} -- it must instead use {{{canonical.launchpad.interfaces.NotFoundError}}}

These restrictions are enforced by the Import Fascist, which will cause your tests not to pass if you don't abide by the rules.

Imports should be fully qualified. Good:

{{{#!python
# foo/bar.py
import foo.baz
}}}

Bad:

{{{#!python
# foo/bar.py
import baz
}}}

I.e. if {{{foo.bar}}} imports {{{foo.baz}}}, it should say {{{import foo.baz}}}, '''not''' {{{import baz}}}.

Imports should not be circular. Bad:

{{{#!python
# foo.py
import bar
}}}

{{{#!python
# bar.py
import foo
}}}

This causes weird bugs. Find a different way to structure your code.

=== Multiline imports ===

Sometimes import lines must span multiple lines, either because the package
path is very long or because there are multiple names inside the module that
you want to import.

'''Never use backslashes in import statements!''' Use parenthesized imports:

{{{#!python
from foo import (
   That TheOther This)
}}}

Our style guide for multiline import statements differs from our general
[[#multiline|guideline for multiline braces]], as a compromise to keep our
import sections to a reasonable size. Our imports should be scrunched
together, and of course sorted alphabetically, like so:

{{{#!python
from canonical.database.sqlbase import (
    cursor, flush_database_caches, flush_database_updates, quote, quote_like,
    sqlvalues, SQLBase)
}}}

Also, 'make lint' is a very good tool for helping you maintain your imports.

=== Import scope ===

We now discourage importing names from packages, where the package's
`__init__.py` has sub-module `import-*` statements. We used to do this quite
a bit for `canonical.launchpad.interfaces` and many other packages. This
style is discouraged now because

 * `import-*`'s obscure the actual location of names, making finding the
   objects much more difficult
 * their use tends to encourage hugantically ginormous multiline import
   statements, increasing the likelihood of merge conflicts
 * you also have to maintain the `__init__.py` files
 * this style can lead to circular import problems

Instead, we now recommend that you do not add `import-*`'s in a package's
`__init__.py`, and instead, use the more fully qualified import statements in
your code. E.g. instead of

{{{#!python
from canonical.launchpad.interfaces import (
    CannotChangeSubscription, CannotSubscribe, CannotUnsubscribe,
    EmailAddressStatus, IEmailAddressSet, IHeldMessageDetails,
    ILaunchpadCelebrities, IMailingList, IMailingListSet,
    IMailingListSubscription, IMessageApproval, IMessageApprovalSet,
    IMessageSet, MailingListStatus, PostedMessageStatus)
}}}

Use

{{{#!python
from canonical.launchpad.interfaces.emailaddress import (
    EmailAddressStatus, IEmailAddressSet)
from canonical.launchpad.interfaces.launchpad import ILaunchpadCelebrities
from canonical.launchpad.interfaces.mailinglist import (
    CannotChangeSubscription, CannotSubscribe, CannotUnsubscribe,
    IHeldMessageDetails, IMailingList, IMailingListSet,
    IMailingListSubscription, IMessageApproval, IMessageApprovalSet,
    MailingListStatus)
from canonical.launchpad.interfaces.message import IMessageSet
}}}

=== Circular imports ===

With the increased use of native Storm APIs, you may encounter more circular
import situations. For example, a `MailingList` method may need a reference
to the `EmailAddress` class for a query, and vice versa. The classic way to
solve this is to put one of the imports inside a method instead of at module
global scope (a "nested import").

Short of adopting something like Zope's lazy imports (which has issues of its
own), you can't avoid this, so here are some tips to make it less painful.

 * Do the nested import in the least common case. For example, if 5 methods
 in `database/mailinglist.py` need access to `EmailAddress` but only one
 method in `database/emailaddress.py` needs access to `MailingList`, put the
 import inside the `emailaddres.py` method, so you have fewer overall nested
 imports.
 * Clearly comment that the nested import is for avoiding a circular import,
 using the example below.
 * Put the nested import at the top of the method.

{{{#!python
        def doFooWithBar(self, ...):
            # Import this here to avoid circular imports.
            from canonical.launchpad.database.bar import Bar
            # ...
            return store.find((Foo, Bar), ...)
}}}

=== Circular imports and webservice exports ===
One of the largest sources of pain from circular imports is caused when you need to export an interface on the webservice. Generally, the only way around this is to specify generic types (like the plain old `Interface`) at declaration time and then later patch the webservice's data structures at the bottom of the interface file.

Fortunately there are some helper functions to make this less painful, in `components/apihelpers.py`. These are simple functions where you can some info about your exported class/method/parameters and they do the rest for you.

For example:
{{{#!python
    from canonical.launchpad.components.apihelpers import (
        patch_entry_return_type, patch_collection_return_type)
    patch_collection_return_type(
        IArchive, 'getComponentsForQueueAdmin', IArchivePermission)
    patch_entry_return_type(
        IArchive, 'newPackageUploader', IArchivePermission)
}}}


== Attributes ==

Trivial attribute getter/setter functions are not necessary. Python takes a "We're all consenting adults" view on encapsulation, so if you want to access an attribute on an instance, just do it.

Be careful when accessing attributes of attributes. E.g.:

{{{#!python
x = foo.bar.baz * 2
}}}

If {{{foo.bar}}} is None, Bad Things will happen, so always check if you're not sure. This is sometimes referred to as the "two dots rule".

If you need to dynamically access an attribute, use {{{getattr}}} rather than {{{eval}}}. It is clearer and safer. For example:

{{{#!python
callback = getattr(self, "handler_" + state)
}}}

== Properties ==

When you need to add a property, ensure that {{{__metaclass__ = type}}} is used as mentioned above. For a read-only property, use the following pattern:

{{{#!python
class SomeClass:
    @property
    def foo(self):
        # Do some processing.
        return bar
}}}

You should rarely need to add a property that has a getter and a setter, but on those occasions, this is how to do it. The getter is the same as for the simple case. The setter is called {{{_setfoo}}}. The name {{{_setfoo}}} starts with an underscore to show that it is not meant to be used except via the property.

{{{#!python
class SomeClass:
    def foo(self):
        """Docstrings are helpful."""
        # Do some processing.
        return bar
        
    def _setfoo(self, value):
        # Do something with 'value'.

    foo = property(foo, _setfoo, doc=foo.__doc__)
}}}

Note the order: getter, setter, make them into a property.

## TODO:
## mutable default arguments
## no __del__
## getattr rather than eval
## steal How should I format my docstrings? from HackingFAQ
## mention pychecker etc.
## mention use of RST in docstrings

== Truth conditionals ==

Launchpad style tests for boolean True only. False, None, and 0 are not the same, and tests that rely on them being the same are ambiguous. Tests of objects that may be None or 0 must be written as truth tests because either value will be interpreted as False by the test.

Let's say you have a sequence (e.g. a list or tuple) and you want test whether it's empty or not. Standard Python convention is just to use Python's rules that empty sequences are false:

{{{#!python
    if not mylist:
 # sequence mylist is empty
 blah()
}}}

However, Launchpad hackers consider it to be more explicit to test against the sequence's length:

{{{#!python
    if len(mylist) == 0:
 # sequence mylist is empty
 blah()
}}}

If the value could be `None` though, please check explicitly against that using an identity check. In other words, don't do this:

{{{#!python
    if not foo:
}}}

and '''definitely''' don't do this:

{{{#!python
    if foo == None:
}}}}

do this instead:

{{{#!python
    if foo is None:
}}}

Note though that `is` and `is not` comparisions should only be used for
comparing singletons, which include built-ins like `None` but also singleton
objects you create in your program:

{{{#!python
missing = object()
thing = mydict.get('thing', missing)
if thing is missing:
   # etc...
}}}

You wouldn't use `==` in that case, but similarly, if you're not comparing
against singletons, you should not use `is`, but `==`:

{{{#!python
if thing == 'foo':
}}}

You might think that because of string interning, it would be safe to use `is`
here, but remember that interning is an implementation detail and you should
not count on any particular string being interned. Always use `==` for
comparison against strings and numbers. Note too that because of the way we
use SQLObject, there may be some cases where you have to use `==` in places
you'd normally think to use `is'.

== If statements ==

The most commonly used patterns like

{{{#!python
    if something:
        do_something()
}}}

and

{{{#!python
    if something:
        do_something()
    else:
        do_something_else()
}}}

are perfectly fine.

However, if you do have some `elif` statements, we consider it a good practice to always include an `else` statement, even if it contains only a comment and a `pass` statement, or an `assert` statement with an appropriate failure message.

{{{#!python
    if isinstance(fruit, apple):
        eat(fruit)
    elif isinstance(fruit, pineapple):
        eat(peel(fruit))
    else:
        # We only eat apples and pineapples.
        pass
}}}

Similarly you may have empty elif blocks, like

{{{#!python
    if 'foo' in request.form:
        foo()
    elif 'bar' in request.form:
        bar()
    elif 'goback' in request.form:
        # No need to do anything; we'll simply redirect the user.
        pass
    else:
        raise UnexpectedFormData()
    redirect()
}}}

This may be considered an example of the "Explicit is better than implicit." principle.

=== Negation ===

A simple `if ... else` statement already contains a negation of the condition,
so it is a good idea to avoid negating the condition because the `not` or `!`
can easily be overread. Try to do it this way.

{{{#!python
    if counter.isFull():
        chime_bells()
    else:
        tick()
}}}

Avoid this:

{{{#!python
    if not counter.isFull():
        tick()
    else:
        chime_bells()
}}}

'''But''' this is ''not'' a strict rule because there may be cases when the
program flow is better to read with the negation first, like when checking
an object for None before accessing its attributes.

{{{#!python
    if froobob is not None:
        blachi = froobob.getIt()
    else:
        blachi = nonchi
}}}

Use your own judgement to achieve maximum readability.


== Chaining method calls ==

Since in some cases (e.g. class methods and other objects that rely on descriptor __get__() behaviour) it's not possible to use the old style of chaining method calls (SuperClass.method(self, ...)), we should always use the super() builtin when we want that.

/!\ The exception to this rule is when we have class hierarchies outside of our control that are known not to use super() and that we want to use for diamond-shaped inheritance.

== Use of lambda, and operator.attrgetter ==

Prefer [[http://docs.python.org/release/2.5.4/lib/module-operator.html|operator]].attrgetter to `lambda`. Remember that giving functions names makes the calls, passes and returns them easier to debug.

== Use of hasattr ==
Use of the built-in `hasattr` function should be avoided since it swallows exceptions. Instead use:
{{{
    if getattr(obj, 'attrname', None) is not None:
}}}

  However, if `None` is a valid value for the attribute, you have to do this instead:

{{{
    missing = object()
    if getattr(obj, 'attrname', missing) is not missing:
}}}

== Database related ==

=== Storm ===

We use two database ORM (object-relational mapper) APIs in Launchpad, the older
and deprecated SQLObject API and the new and improved [[http://storm.canonical.com|Storm]] API. All new code should use the Storm API, and you are encourages to convert existing code to Storm as part of your tech-debt payments.

Note:

 * The SQLObject and Storm `ResultSet` interfaces are not compatible, so e.g. if you need to `UNION` between these two, you will run into trouble. We are looking into ways to address this.
 * Using the native Storm API can be verbose and inconvenient for some folks. There is a (somewhat) experimental `Sugar` base class in `lib/canonical/launchpad/database/stormsugar.py` which provides many convenient APIs to make your use of Storm easier.

=== Field attributes ===

When you need to add ID attributes to your database class, use `field_id` as the attribute name instead of `fieldID`.

=== Multi-line SQL ===

SQL doesn't care about whitespace, so use triple quotes for large SQL queries or fragments, e.g.:

{{{
#!python
    query = """
        SELECT TeamParticipation.team, Person.name, Person.displayname
        FROM TeamParticipation
        INNER JOIN Person ON TeamParticipation.team = Person.id
        WHERE TeamParticipation.person = %s
        """ % sqlvalues(personID)
}}}

This also easy to cut-and-paste into `psql` for interactive testing, unlike if you use several lines of single quoted strings.

== Unpacking assignment ==

{{{
#!python
  val_1, val_2 = multival_func()
}}}

And for 1-tuples

{{{
#!python
  assert (len(vals) == 1,
      "Expected 1 value, but received %s" % len(vals))
  val_1 = vals[0]
}}}


== Creating temporary files ==

We should use the most convenient method of the `tempfile` module, never taint '/tmp/' or any other 'supposed to be there' path.

Despite of being developed and deployed on Ubuntu systems, turning it into restriction might not be a good idea.

When using `tempfile.mkstemp` remember it returns an open file-descriptor which has to be closed or bound to the open file, otherwise they will leak and eventually hit the default Linux limit (1024).

There are 2 good variations according to the scope of the temporary file.

{{{
#!python
    fd, filename = mkstemp()
    os.close(fd)
    ...
    act_on_filename(filename)
}}}

Or:

{{{
#!python
    fd, filename = mkstemp()
    temp_file = os.fdopen(fd, 'w')
    ...
    temp_file.write('foo')
    temp_file.close()
}}}

'''Never''' use:

{{{
#!python
    fd, filename = mkstemp()
    temp_file = open(filename)
    temp_file.write('foo')
    temp_file.close()
    # BOOM! 'fd' leaked.
}}}

It's also important to mention that in testing context, specially if you are using the `lp.testing.TestCase` (or one of its specializations) you can simply create a brand new temporary directory (using `mkdtemp`). Create as many files you need within it and register a `cleanup` function to purge the temporary directory recursively.

{{{
#!python
class TestFoo(TestCase):
...
    def test_foo(self):
        tempdir = mkdtemp()
        self.addCleanup(shutils.rmtree, tempdir)
 ...
 do_something(os.path.join(tempdir, 'test.log'))
 ...
}}}
#refresh 0 https://launchpad.readthedocs.io/en/latest/guides/python.html

PythonStyleGuide (last edited 2021-11-25 16:16:21 by cjwatson)