LXD VM Support

This is now on stable and allows for management of VMs with the same LXD CLI.

For now, we need to use the images: source for images, rather than the ubuntu: images. The default ubuntu images do not have the LXD agent preinstalled. Once they do, this gets a bit simpler.

It is also slightly simpler to use the ubuntu user, as it is already available in the image and doesn't require as many hoops jumped to get uid/gid mapping to work.

Create a LXD profile for VMs

This is a convenience helper profile for VMs that will add users and run cloud-init for installing the LXD VM agent. It is not required and you can pass the options on the lxc command. The password for the user can be generated using:

    mkpasswd -m sha-512 <password>

mkpasswd lives in the whois package.

For now, we are using the LXD provided cloud images as it has the LXD agent and cloud-init preinstalled. This requires a smaller LXD profile, but needs some extra commands afterwards.

To create this run:

    lxc profile create vm

and then:

    lxc profile edit vm

name: vm
config:
  limits.cpu: "2"
  limits.memory: 4GB
  user.vendor-data: |
    #cloud-config
    package_update: true
    ssh_pwauth: yes
    packages:
      - openssh-server
      - byobu
      - language-pack-en
    users:
     - name: "ubuntu"
       passwd: "<shell password hash>"
       lock_passwd: false
       groups: lxd
       shell: /bin/bash
       sudo: ALL=(ALL) NOPASSWD:ALL
       ssh-import-id: <lp username>
description: ""
devices:
  config:
    source: cloud-init:config
    type: disk
  eth0:
    name: eth0
    nictype: bridged
    parent: lxdbr0
    type: nic
  work:
    path: <path to folder you want to share to in the VM>
    source: <path to folder you want to share from the host>
    type: disk

Start the LXD VM

Start a VM via downloading the images: cloud image

lxc launch images:ubuntu/<release name>/cloud -p vm -p default <vm name> --vm

This will take a while to settle. You can monitor its progress with lxd console <vm name>. Once it has complete cloud-init, you should then see an IP assigned in lxc list and be able to execute a bash shell with lxc exec <vm name> bash.

Configure password and ssh

This should be done by the cloud-init config in the profile, but the package is not installed at the time that is run, so do it afterwards manually:

lxc exec <vm name> sudo passwd ubuntu
lxc exec <vm name> --user 1000 "/usr/bin/ssh-import-id" <launchpad user id>

This will not be required once we can use the ubuntu: image source in LXD.

Launchpad Buildd

We'll need a clone of this and then build and install it for running.

Branch

sudo apt install git
git clone https://git.launchpad.net/launchpad-buildd

Install dependencies

cd launchpad-buildd
sudo apt-add-repository ppa:launchpad/ubuntu/buildd-staging
sudo apt-add-repository ppa:launchpad/ubuntu/ppa
vi /etc/apt/sources.list.d/launchpad-ubuntu-ppa-bionic.list <uncomment deb-src line>
sudo apt update
sudo apt build-dep launchpad-buildd fakeroot
sudo apt install -f

Make and install the package

make
cd ..
sudo dpkg -i ./python3-lpbuildd_<version>_all.deb ./launchpad-buildd_<version>_all.deb

Run the buildd

Edit /etc/launchpad-buildd/default and change 'ntphost' to something valid (ntp.ubuntu.com should work)
sudo mkdir -p /var/run/launchpad-buildd
sudo chown ubuntu: /var/run/launchpad-buildd
/usr/bin/python3 /usr/bin/twistd --no_save --pidfile /var/run/launchpad-buildd/default.pid --python /usr/lib/launchpad-buildd/buildd-slave.tac -n

Making changes

The package is installed as a system deb, so to make changes you will need to rebuild and reinstall the package following the 'Make and install' section.

Testing

You probably want the next section ('Configuring Launchpad') at this point, but if you are doing any buildd development and need to test your changes without having to have the whole system running, you can use the XML-RPC interface to cause builds to happen.

Getting a base image

First, we need a base image to use for the builds. Usually this is pulled as part of a build, but if we don't have Launchpad involved, we need to set this up manually.

bzr branch lp:ubuntu-archive-tools
sudo apt install python3-launchpadlib python3-ubuntutools
./manage-chroot -s bionic -a amd64 get
sha256sum livecd.ubuntu-base.rootfs.tar.gz/home/buildd/filecache-default
mv livecd.ubuntu-base.rootfs.tar.gz <sha256sum from previous line>
sudo cp <sha256sum named file> /home/buildd/filecache-default
sudo chown buildd: /home/buildd/filecache-default/<sha256sum named file>

Running a build

You can try running a build via the XML-RPC interface. Start a python/ipython repl and run.

import xmlrpclib
proxy = xmlrpclib.ServerProxy("http://localhost:8221/rpc")
proxy.status()

Assuming that works, a sample build can be created using (relying on the OCI capabilities being merged into launchpad-buildd):

proxy.build('1-3', 'oci', '<sha256 of base, possibly from previous section>', {}, {'name': 'test-build', 'series': 'bionic', 'arch_tag': 'amd64', 'git_repository': 'https://github.com/tomwardill/test-docker-repo.git', 'archives': ['deb http://archive.ubuntu.com/ubuntu bionic main restricted', 'deb http://archive.ubuntu.com/ubuntu bionic-updates main restricted', 'deb http://archive.ubuntu.com/ubuntu bionic universe']})

Configuring Launchpad

Running soyuz and adding data

First, you'll need to run some extra bits in Launchpad:

utilities/start-dev-soyuz.sh
utilities/soyuz-sampledata-setup.py
make run

User setup

It's convenient to add your user to the correct groups, so you can interact with it, without being logged in as admin.

1. Log in as admin

2. Go to https://launchpad.test/~launchpad-buildd-admins and add your user

3. Go to https://launchpad.test/~ubuntu-team and add your user

Registering the buildd

The buildd that you have just installed needs registering with Launchpad so that builds can be dispatched to it.

1. Go to https://launchpad.test/builders

2. Press 'Register a new build machine'
3. Fill in the details.

   • The 'URL' is probably 'http://<buildd ip>:8221'.

   • 'Virtualized' should be true
   • VM reset protocol can be either 1.1 or 2.0
4. After 30 seconds or so, the status of the builder on the builders page should be 'Idle'. This page does not auto-update, so refresh!