• Immutable Page
• Info
• Attachments
• More Actions: Raw Text Print View Render as Docbook Delete Cache ------------------------ Check Spelling Like Pages Local Site Map ------------------------ Rename Page Delete Page ------------------------ Subscribe User ------------------------ Remove Spam Revert to this revision Package Pages Sync Pages ------------------------ Load Save SlideShow

• Process Name: Release Manager Rotation Process

• Process Owner: Francis Lacoste

• Parent Process/Activity: None

• Supported Policy: None

Process Overview

Each cycle a different engineer takes the role of release manager. The release manager coordinates with the release team and all team leads to ensure that the tree is ready for the roll-out and that all critical bugs are in or worked-around.

Back-up release managers are the two RMs from the previous two cycles.

One option that has worked very well is to share the release-manager role across timezones, handing over the current status and tasks to the backup in the next timezone at the end of your day. It's a great opportunity to work together as a team.

Release Manager inputs

• Email and IRC messages from engineers and team leads.
• OOPS reports
• Merge proposals

• LaunchpadProductionStatus (private)

Activities

Week 3 (the one before the roll-out)

• During week 3 ensure that staging is up-to-date so that it can be used for non-edge QA.

• During week 3 ensure that Matt Revell has a downtime announcement email ready for lp-announce.
• The down-time estimate should be based on the last staging DB restore.
• During week 3 send out an email to Stuart Metcalf from Canonical ISD about the upcoming roll-out to ask about any changes that need to be rolled-out for canonical-identity-provider or shipit. (Launchpad roll-outs imply

  a roll-out of the Canonical Identity Provider and ShipIt code).

• You might want to request that pqm-blockers (such as cherry-picks) are not processed on the day that PQM is closing.

• At the end of the week, make sure all the cowboys listed on LaunchpadProductionStatus are either already landed or listed among CurrentRolloutBlockers

• Also go through all the 'unusual rollout requirements' and clean them up from LaunchpadProductionStatus page

Release Week

• At the beginning of week 4. Make sure that release-critical was turned on in PQM. (Monday 00:00 UTC)
  • There is an option to leave devel open for r-c landings as well until Tuesday.
• At the beginning of week 4, schedule a call with the Foundations team lead (and other leads if known to be pertinent) to determine what system changes might need comprehensive QA. If these exist, consider these thoughts.
  • Any related problem encountered should be treated as a red flag, forcing more thorough QA.
  • Foundations lead should report on reviewing logs on edge, such as of cronscript output.
• Look at the staging DB restore time for the week-end and determine if any changes to the announced down-time should be made.

• Determine the schedule and deadlines. Send an email to launchpad-dev with all of the deadlines, similar to this example email. Place the deadlines on the team calendar.

• Update the #launchpad-dev topic to state we are in 'Release Critical' and to list the release manager.

• Maintain the list of the Current roll-out blockers

  • The release manager should poll the team leads and QA engineers continuously to ensure that the list of release blockers is up-to-date. (We need to explore a work-around to retire this wiki page and do the management in Launchpad.) All bugs that are likely to cause lots of OOPSes, time-outs or prevent several users from working are good CRB candidates. It's a good idea to subscribe yourself to the page. (Currently broken.)
• Make sure that developers are assigned to all problems we want to fix.
• Review release-critical merge proposals. The policy should be:
  • All RC candidates go through the normal review process.
  • After code and UI review the MP is left in 'Needs Review' state.
  • A new review of type 'release-critical' is added to the MP and assigned to the release manager.
  • If the MP is approved for 'release-critical', the review is marked 'Approve' and the state of the MP is set to 'Approved'.

On the day before the roll-out

• Check that the LOSA do a staged deployment of the code. We are looking for any hidden build problems and to determine the amount of time this step will take.

• Request that landing to the devel branch be closed, 24 hours before the scheduled release. All changes should on the last day be merged through db-devel.

On the day of the roll-out

• Chase up Current Rollout Blockers and any other pending release-critical fixes.

• With PQM remaining open, have the LOSAs stop buildbot and set it do manual runs.

• Remind people that all changes need to be in buildbot for 9 hours before the roll-out time. The LOSAs require two hours of pre-release preparation and we need to allow for two complete buildbot cycles. (9 = 2 + 2 * 3.5)

• In the case of failures, it's best to roll-out the last-known-good-build rather than delaying the release. The cut-off point to decide which revision

  to roll out is 2 hours before the scheduled release.

• Ensure that any embargoed external resources (e.g. blog entries) are live and accessible through the links provided. Ensure that a blog editor (Matthew Revell or delegate) is available at the time of the roll-out.

• Immediately after the roll-out, examine the site for problems. For example, ensure CSS loads properly, all external links on the front page are reachable, etc.
• Check that source code dependencies revision numbers are correct (compare

  them with what is listed in utilities/sourcedeps.conf) "bzr branch lp:~launchpad-pqm/lp-production-configs/trunk" then look at config-manager/production-{devel,stable}

During the roll-out

• If some unexpected problems are encountered during the roll-out and these put the roll-out schedule off-track by more than 30 minutes, the decision to abort the roll-out should be taken. In that case:
  • Identify the source of the problem and come up with a best estimate on how soon it can be fixed.
  • Determine when the next attempt should be undertaken and make sure it is announced. Give at least 12 hours of fore-notice.

After the roll-out

• With the QA engineers, review the OOPS reports.
  • All common OOPSes are candidates for more release-critical fixes and scheduling another roll-out.
• Prepare and schedule any necessary re-roll.
• When a re-roll is needed, same activities than in the pre-roll out case.
• Open the tree, when the released version is fine for the next cycle.
• The release-manager needs to select the next release manager.

Re-opening PQM

Once the roll out is complete and any critical issues have been dealt with, it's time to re-open PQM. Before doing that, though, we need to merge db-devel back into devel.

Release critical policy

• To apply for a release-critical approval, you must have a reviewed merge proposal on Launchpad. The engineer adds a review of type

  release-critical to the merge proposal and ensures it is in the 'Needs Review' state.

• Good candidates for release-critical approval are issues found during QA that are bound to create OOPSes and time outs or otherwise significantly inconvenience our end-users.
• Apart from special exceptions discussed with the project lead, only bug fixes should be granted release-critical approval.
• If there is no way for the developer to QA his change on staging through the normal update procedure before the roll-out, it's recommended to request a cowboy of the branch on staging to QA it before approval.

Database Patches

• Release-critical branches containing database patches should only be accepted if they don't impact the estimated roll-out time.
• One the day of the roll-out, only database patches that would be critical to prevent data corruption should be accepted.
• For the second re-roll, again only DB patches critical to data safety should be considered as it impacts our ability to update without down-time.

Scheduling

• Engineers apply in advance for one cycle.
• They are selected by the previous release manager. Once selected, their name

  is put on the Launchpad Production Status page.

• The actual roll-out time is determined by the release-manager's location:

  • Location	Roll out time
    Americas	23:00UTC
    Europe	10:00UTC
    Asia/Pacific	00:00UTC

• No engineer should apply for the role more than twice a year.

References

• OSA Launchpad Rollout Procedures

• SpuriousFailures -- useful for diagnosing last-minute build failures

• CurrentRolloutBlockers -- things currently blocking rollout

• QATeam/TestPlans -- proof from all the teams that their code works

• Launchpad production status